Best Leatherman Sheaths And Holsters 2026 Guide | Clip & Carry

Best Leatherman Sheaths and Holsters (2026 Guide)

The nylon pouch that came in the box is the weakest part of a Leatherman. It holds the tool with a flap and a snap, so getting the multi-tool out takes two hands and a moment of fumbling, and the corners wear through long before the tool does. A kydex sheath is formed over your exact model, holds it by friction, and lets you draw and reholster one-handed with an audible click. This page lists every Leatherman we cut a sheath for, with the guide for each.

Find your Leatherman

Leatherman model Sheath Full guide
Arc Kydex sheath Read the guide
Wave, Wave+ Kydex sheath Read the guide
Wave Alpha Kydex sheath Read the guide
Surge Kydex sheath Read the guide
Charge, Charge+ Kydex sheath Read the guide
Skeletool, Skeletool CX Kydex sheath Read the guide
Signal Kydex sheath Read the guide
MUT Kydex sheath Read the guide
OHT Kydex sheath Read the guide
Super Tool 300 Kydex sheath Read the guide
Free P4, Free P2 Free P4 sheath, Free P2 sheath Read the guide
Raptor, Raptor Response Raptor sheath, Raptor Response sheath Read the guide
Bond, Original PST Bond sheath, Original PST sheath Read the guide
Wingman, Sidekick, Rebar, Rev Kydex sheath Read the guide
Squirt PS4, Style PS Kydex sheath Read the guide
Bit Kit (bit driver set) Kydex sheath Read the guide

Why the model has to match

A kydex sheath is vacuum-formed over the closed tool, so the shell is a negative of that specific body. Retention comes from the shell gripping the tool, not from a strap, which is what makes the one-handed draw possible and what makes fit non-negotiable. The Wave and the Wave+ share a body, so one mold covers both. The Wave Alpha does not, despite the name. The Surge is longer and thicker than the Wave and needs its own. If the tool is loose enough to rattle, the fit is wrong, and no amount of screw tension will fix a mold cut for a different model.

Kydex versus nylon, honestly

Nylon is lighter and cheaper, and if the multi-tool lives in a drawer or a toolbox it is fine. The case for kydex is daily carry. It draws one-handed, it does not absorb water or sweat, it holds its shape when the tool is out, and it does not fray. The trade is that it is rigid and it is model-specific, so it will not swallow a slightly different tool the way a nylon pouch will. Kydex vs nylon multitool sheaths goes through the wear testing in detail.

Belt, MOLLE, pocket or pack

Every sheath ships with a belt clip that fits belts up to about 1.75 inches, and the clip can be remounted to change cant or to ride horizontally at the back of the belt, which sits flattest under an untucked shirt. A MOLLE clip swaps onto the same screw holes for a pack, a plate carrier or a tool bag. Multitool sheaths with a belt clip covers what to look for, and how to carry a Leatherman ranks the five common ways.

Retention, screws and spares

Retention is set by the screws through the shell: tighten for a firmer hold, back off a quarter turn if the draw is stiff. They can loosen over months of use, and a drop of removable threadlocker settles it. If you lose one, or want to swap the belt clip for a MOLLE clip, the sheath hardware kit has the screws, washers and pass-through post. A drop of knife oil on the pliers pivot once a season is the other piece of maintenance worth doing.

If your model is not listed

Write to us. The molds are cut in house in the USA and the list above has grown mostly because customers asked. For a discontinued tool, measure the closed length and thickness and we can usually point you at the closest existing mold. We also cut sheaths for Gerber multi-tools, Knipex pliers, the Buck 110 and 112 and Victorinox Swiss Army knives.

Frequently asked questions

Which Leatherman sheath do I need?

The one cut for your exact model. A kydex sheath is formed over the closed tool, so it grips the body of that multi-tool and nothing else. A Wave sheath will not hold a Surge, and a Skeletool will rattle in either. Find your model in the table above and the guide for it lists the fit.

Will a Wave sheath fit a Wave+?

Yes. The Wave and the Wave+ share the same closed dimensions, so one mold covers both. The Wave Alpha is a different tool with a different body and takes its own sheath.

Is kydex actually better than the nylon pouch that came with it?

For daily carry, yes, and for one reason: retention. Nylon holds the tool with a flap and a snap, so you need two hands and a second of fumbling. Kydex is formed to the tool and holds it by friction, so it draws and reholsters one-handed and clicks when it seats. Nylon also soaks up water and wears through at the corners. Kydex does not absorb anything and the sheath usually outlives the tool.

How does it attach to my belt?

Every sheath ships with a belt clip that takes a belt up to about 1.75 inches and can be reset for different cant. If you want it on a pack or a plate carrier instead, a MOLLE clip swaps straight onto the same screw holes. Both are covered in the carry section above.

Can I carry it horizontally?

Yes. The clip mounts on more than one face, so the same sheath can ride vertically on the strong side or horizontally at the back of the belt, which is the flatter option under an untucked shirt.

Do the screws come loose?

They can, over months of drawing and reholstering, and that is also how you adjust retention. A drop of removable threadlocker fixes it for good. Replacement screws, washers and the pass-through post are sold as a hardware kit if you lose one or want to change the clip.

What if my Leatherman is not in the table?

Write to us. The molds are cut in house and the list grows; several of the models above started as a customer asking. For an older or discontinued tool, measure the closed length and thickness and we can usually tell you which existing mold is closest.

The bottom line

Find your model in the table, read the guide for it if you want the detail, and buy the sheath cut for that exact tool. The upgrade people notice first is the one-handed draw; the one they notice a year later is that the sheath still looks new.

Related reading

Which Leatherman should I buy? A decision guide
Best Leatherman multitools, ranked
Leatherman Wave+ vs Surge vs Charge+
Leatherman belt holster options compared
How to sharpen a Leatherman
Can you bring a Leatherman on a plane?

Gear from Clip & Carry

Made in the U.S.A.

Kydex sheaths for the gear you just read about

Clip & Carry makes kydex sheaths and holsters for dozens of multitools, knives, and Byrna launchers, right here in the U.S.A.

Shop sheaths
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.