Best Holsters for the Glock 17 (Also Fits 22 and 31) | Clip & Carry

Best Holsters for the Glock 17 (Also Fits 22 and 31)

The Glock 17 is the full-size Glock: 17 rounds of 9mm, a 4.49-inch barrel, and the gun most police departments and militaries picked when they picked Glock. It is bigger than most people want to conceal and easier than most people think. This guide covers the kydex IWB we make for the 17, why it also fits the 22 and 31, the light-bearing options, and how to hide a full-size pistol.

Quick specs: Glock 17 holsters

Spec Detail
Fits Glock 17, 22, 31
Type Inside the waistband, untucked shirt; OWB paddle where listed
Material .08" kydex
Cant Adjustable
Retention Adjustable screws, audible click
Hand Right or left
Made USA
Warranty Lifetime

Which Glock 17 models share a holster

The 17 (9mm), 22 (.40) and 31 (.357 Sig) share the full-size slide and frame, so one molded holster fits all three. The 19 does not fit; its slide is shorter and will not seat. The 34 and 35 have longer slides and need their own mold, though the open-muzzle light-bearing holster below accepts them.

The holsters, reviewed

Clip & Carry IWB Holster for the Glock 17 / 22 / 31

IWB Holster for the Glock 17/22/31

Molded in .08-inch kydex with no excess material, so the gun seats with an audible click and stays put. The edges are folded rather than left square, the sweat shield runs the full length of the slide, and the belt clip cants 20 degrees either direction. Retention is set with screws, and the screw spacing accepts a claw. Handmade in the U.S.A. by a military veteran, right or left hand, black or carbon-fiber-pattern kydex, lifetime guarantee. $44.99. On a full-size gun the full-length sweat shield keeps the slide off your skin all the way to the rear sight.

IWB Holster for the Glock 17 with a Streamlight TLR-7A / TLR-7X

IWB Holster fits: Glock 17 19 19X 26 31 32 33 34 45 47 49 TLR7A/TLR7X

Molded to the TLR-7A / 7X light body with an open muzzle, so it fits the 17, 22, 31, 34, 47 and 49 with the light attached. Optic-compatible cut, claw mount. Formed over a CNC-milled aluminum mold, with Posi-Click retention, cant adjustable from -5 to +20 degrees, an undercut trigger guard for a clean grip, an open muzzle for threaded barrels, and clearance for suppressor-height sights. 1.5-inch belt clip, right or left hand, made in the USA, lifetime warranty. $49.95.

Paddle Holster for the Glock 17 with a TLR-7A / TLR-7X

Paddle Holster fits: Glock 17 19 19X 26 31 32 33 34 45 47 49 TLR7A/TLR7X

The OWB paddle version for the range, duty, or open carry where legal. Optic-compatible cut. The outside-the-waistband version on a paddle that slides over the belt without unthreading it. Same aluminum-mold fit and Posi-Click retention, cant adjustable -5 to +20 degrees, open muzzle, suppressor-sight clearance. Right or left hand, made in the USA, lifetime warranty. $54.95.

How to carry a Glock 17

Appendix

A 17 at appendix is doable for taller people; the slide length is the limit when you sit. Neutral cant, a claw, and a belt that does not sag.

Strong side

Where most full-size guns live. Fifteen to twenty degrees of forward cant at 3:30 or 4 o'clock rotates the tall grip along the body and lets the long slide ride below the belt line under an untucked shirt.

Optics and lights

The Clip & Carry mold clears standard sights and low-mount optics on a slide with no light. With a TLR-7 attached use the light-bearing mold; the light changes the profile and a standard holster will not click.

Which Glock 17 holster to buy

The full-size Glocks have the widest light support in the range, so the light you run decides more than the gun does.

Hiding a full-size pistol, honestly

A Glock 17 is 7.95 inches of gun and no holster adjustment changes that. What setup does is move the two parts that give you away. The grip prints at the top, so a claw and a stiff belt rotate it in. The slide prints at the bottom when you bend, so ride height and cant decide whether the muzzle tents your shirt. Strong side at 3:30 to 4 o'clock with fifteen to twenty degrees of forward cant is the combination that works for most people, because the cant lays the whole gun along the curve of your side instead of standing it upright against your ribs. Appendix is possible if you are tall through the torso and willing to run the holster low, and uncomfortable if you are not. The honest alternative, if you have tried all of this and the gun still shows, is to carry a 19 and keep the 17 for the range: the holster you bought still fits it if you run the TLR-7 mold.

Frequently asked questions

Does a Glock 17 holster fit a Glock 19?

No. The 19 slide is shorter and will not seat in a 17 mold.

Does this holster fit the Glock 22 and 31?

Yes. All three share the full-size slide and frame.

Does it fit a Glock 34?

The standard mold does not. The open-muzzle TLR-7 holster does, with the light attached.

Can you conceal a Glock 17?

Yes, at 3:30 or 4 o'clock with forward cant and a sturdy belt. The grip is the part that prints, so a claw helps.

Is there a left-hand version?

Yes, for every holster listed.

Will a Glock 17 holster fit a Glock 47 or 49?

The standard mold is cut for the 17, 22 and 31. The light-bearing molds have an open muzzle, so those do take the 47 and 49 with the light attached.

Can you actually conceal a Glock 17?

Yes, with forward cant at 3:30 to 4 o'clock, a claw, and a belt that does not sag. The limit is usually sitting down, not standing.

Is the TLR-7 holster or the Baldr holster the better pick?

Whichever matches the light you already own. They are molded to different light bodies and are not interchangeable.

The bottom line

The Glock 17 IWB holster at strong side with forward cant is how a full-size Glock disappears. Molded, adjustable, guaranteed for life.

Related reading

Best holsters for the Glock 19
Best holsters for the Glock 26
Concealed carry clip holsters explained
Kydex holsters by gun model

Gear from Clip & Carry

Made in the U.S.A.

Kydex sheaths for the gear you just read about

Clip & Carry makes kydex sheaths and holsters for dozens of multitools, knives, and Byrna launchers, right here in the U.S.A.

Shop sheaths
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.